Total time reference for many situations:
Expert engineer + basic accuracy calibration: Only zero-point calibration and five standard range point calibration are finished in a total of one to one and a half hours, swiftly finishing calibration and resuming production.
Regular maintenance staff plus standard full-range calibration: takes 1.5 to 2 hours to complete both thermal signal-specific and full-range point-by-point calibration.
High-precision full-channel calibration takes two to three hours, including one hour for stability verification and multi-channel full-range point-by-point calibration.
Time Consumption Breakdown by Stage:
30 minutes for equipment warm-up and pre-calibration preparation
Ten to fifteen minutes for zero-point calibration
30 to 60 minutes for full-scale point-by-point accuracy calibration
Calibration of Thermal Signals: 20–30 minutes
Verification of post-calibration stability: 30 to 60 minutes
Important Elements Influencing Time Use:
The full-scale point-by-point calibration takes longer if the equipment has more channels. Compared to single-channel equipment, multi-channel equipment requires more than 50% more time to calibrate.
The calibration time decreases with the level of technical expertise of the maintenance staff. When compared to novices, experienced engineers can save operation time by almost 40%.
The ensuing stability certification process takes longer and takes longer overall if the production line's accuracy requirements are higher.
The production line's schedule can be less affected by calibration time if the reference calibrator is properly warmed up and test cables are prefabricated.
