I. Core Synchronization Hardware Tools
Multi-Channel Signal Generator Main Unit: A dedicated analog signal generator for hot runner systems, supporting multi-device cascading and external trigger input/output. It serves as the core carrier for synchronization output.
BNC Coaxial Cable: Used to connect the synchronization signal ports of each channel, transmitting the trigger clock signal and ensuring low-loss signal transmission.
BNC T-Connector: In multi-channel synchronization scenarios, it splits the synchronization trigger signal of the main channel into multiple channels, simultaneously distributing them to the external trigger inputs of all slave channels.
II. Auxiliary Calibration and Verification Tools
Dual-Channel or Higher Oscilloscope: Acquires the output signals of all channels, visually viewing the time and phase synchronization relationship of each channel and measuring synchronization deviation.
High-Precision Multimeter: Assists in verifying the amplitude accuracy of the output signal of each channel, confirming that the deviation between the output value and the set value is within the allowable range.
Anti-static Wristband: Worn during operation to prevent electrostatic discharge from damaging the precision signal ports of the signal generator and protect the equipment hardware. This toolkit perfectly matches the field operation requirements for multi-channel signal synchronization in hot runner systems. No additional special equipment needs to be purchased; multi-channel synchronization configuration can be completed using conventional industrial maintenance tools.
