Intuitive Panel Status Verification The red alarm indication light on the Husky thermostat panel has totally turned off, and the alarm pop-ups and flashing warning symbols on the screen have disappeared, leaving no lingering alarm cues.
Check that the temperature display on the thermostat's main interface has reverted to normal, no longer displaying full-scale, garbled or error codes under alarm situations, and that the temperature value corresponds to the real ambient temperature of the hot runner.
In-depth System Log Verification: Access the thermostat's "Alarm Log" interface and ensure that previously triggered alarm entries have been modified to "Reset/Cleared," with no unprocessed active alarm recordings.
Check the system status parameters to ensure that all alarm-locked heating output channels have been automatically unlocked, and the thermostat has reverted to its regular standby or ready-to-heat condition.
Operating Conditions Verification: Start the hot runner temperature control system to heat up, then check that the temperature curve climbs smoothly, the thermostat does not continually trigger the same alert during the process, and the heating coil output current is normal with no anomalous changes.
Operations Verification: Start the hot runner temperature control system to heat up. Check that the temperature curve climbs smoothly, the thermostat does not continually trigger the same warning, and the heating coil output current is normal with no unexpected jumps. After operating continuously for 10-15 minutes to establish stable temperature control system performance, with temperature swings within the normal range and no alert recurrence, the Husky temperature controller alarm reset may be declared 100% effective.
This certification technique comprehensively checks the reset effect of the Husky temperature controller, eliminating residual concealed alarm threats from interfering with the proper production operation of the hot runner.
