Common Models of Compatible Test Cables:
The Fluke PM 9091 Coaxial BNC Cable Kit has a maximum signal voltage of 300V rms and a maximum ground voltage of 600V rms. Each cable is 1.5 meters long. Three black cables with colour-coded BNC male connectors for simple channel identification are included in each package. compatible with the majority of popular hot runner signal generators' BNC interface signal transmission specifications.
The 5440A-7002 Low Thermoelectric Potential Test Cable (Banana Connector) has a retractable spring protection cover and a 4mm diameter safety banana connector. The cable is 24 inches ± 1 inch long. Compared to standard test cables, the thermoelectric potential is much lower, reducing the additional thermoelectric potential mistakes caused by temperature changes at both ends. Ideal for hot runner systems with millivolt-level thermocouple signals and high-precision calibration scenarios.
The Fluke OC4USB USB Interface Cable's optically isolated architecture enables the signal generator's optically isolated serial interface to be connected to a computer's standard USB interface, making it appropriate for situations that demand for remote device parameter setting and automatic calibration data gathering.
The Fluke PAC 91 Printer Adapter Cable satisfies the archiving and compliance requirements of industrial metrology traceability by automatically printing calibration records upon calibration.
Selection and Compatibility Considerations: The PM 9091 coaxial BNC cable kit is recommended to satisfy typical testing requirements for standard voltage and frequency signal calibration scenarios.
The 5440A-7002 low thermoelectric potential test leads are required for high-precision thermocouple millivolt-level thermal signal calibration scenarios in order to prevent measurement mistakes caused by additional thermoelectric potential.
The cable interface type must be completely compatible with the output port of your hot runner signal generator. To prevent signal transmission attenuation, original equipment manufacturer (OEM) cables are recommended.
Precision injection moulding hot runner production lines have made extensive use of these models in calibrating scenarios. Models can be directly chosen and bought according to your real testing requirements.
